Asphalt concrete plant BMZ-160
3 270 296 THE VILLAGE
Enquire conditions
and delivery time
We'll call you back within 15 minutes
Specify your requirements
Send prices and terms of delivery
Mixing unit |
Hot Material Hopper |
Rumble (6 factions) |
Elevator |
Dryer drum |
Belt dust elevator |
Dosing conveyor complex KDK-60 |
Operator cabin with control system |
Ready mix bunker, 50 t |
Burner, 14 MW |
smoke exhauster |
Filter bag installation |
Screw compressor |
Chimney |
ACS-160 connection kit |
Bitumen storage |
Bitumen pumping unit |
Cellulose additive unit MZCD |
Thermal oil gas boiler KTM-0.5 |
Double silo of dust and mineral powder |
Silo connection augers |
Asphalt concrete plant model BMZ-160, with a capacity of 160 tons of finished asphalt per hour of work.
Comes in different models, the selection of the necessary equipment assists the Sales Manager.
Description of work BMZ-160
From the loaded bunkers of the dosing complex, inert materials (crushed stone, sand) in certain proportions are fed into the drying drum, where they are dried and heated to 160 °C by heating with a burner. The resulting dust and flue gases through the air duct system through the draft created by the smoke exhauster enter the filter unit, where the dust is separated and the flue gases removed through the chimney are filtered. The separated coarse dust is returned by means of a screw conveyor to the hot aggregates elevator. The fine dust, shaken off from the filter bags, enters the dust elevator by means of a screw conveyor, from which it is either dosed and used to produce asphalt concrete, or redirected to the dust silo for storage and further use in production.
After warming up, the inert materials go through the elevator to the screen. The screen, in turn, separates materials into fractions and separates oversized inert materials, which are subsequently disposed of. The hot materials separated by fractions enter the storage sections of the hot inert materials hopper. Each of the fractions is weighed on a weight dispenser and in certain proportions (given on the basis of the asphalt concrete formulation), and then all the fractions are fed into the mixer.
In front of the mixer there are also dispensers of mineral powder and dust, bitumen and cellulose additive. Mineral powder and dust from the corresponding silo are fed into the batcher by means of a screw conveyor, weighed and sent to the mixer. The cellulose additive from the cellulose additive unit is fed into the dispenser by means of pneumatic transport, weighed and sent to the mixer.
The bitumen is heated up to 150 °C in the bitumen storage, it enters the dispenser through the heated line, is weighed and fed into the mixer. Initially, dry materials (crushed stone, sand, mineral powder, dust) are mixed in the mixer, after the bitumen is supplied, the final mixing takes place, which lasts no more than 20 seconds.
Ready asphalt concrete comes from the mixer into the storage bin of the finished mixture, from which it is then unloaded directly into the body of a truck.
- Production ZZBO (Russia, Zlatoust).
- Warranty - 2 years
- Performance - 160 tons per hour
- Service, spare parts and service from Russian manufacturer
- Automatic plant control SCADA-system, all data and control from one monitor
- All nodes in the transport envelope and delivery to the place of work of a typical transport
- A wide range of options: ext. silo, bitumen tanks, silos for powder and waste, all types of filters
Technical Features
- Plant productivity, t/h 160 (3% moisture content of materials)
- Feed hoppers with inert materials, quantity, volume 6 bunkers of 10m³
- Thermal power of the burner, MW 14
- Number of screen sieves, pcs 6
- Hot materials hopper volume, m³ 22
- Weight of one batch, kg 2,000
- Dryer drum drive power, m² 4 x 11
- Filtration area, m² 620
- Smoke exhauster power, kW 110
- Mineral powder silo volume, m³ 25
- Dust silo volume, m³ 18
- Bucket elevator capacity, t/h 160
- Bucket elevator power, kW 22
- Screen mesh size, mm 4, 8, 12, 16, 20, 40
- Vibrodrive power, kW 2 х 45
- Weighing limit of hot inert materials, kg 2,000
- Mixer drive power, kW 2 х 45
- Operator cab dimensions, m 2.2 x 6
- Finished product temperature, ℃ 140-160
- Compressor power, kW 45
- Total electric power of the plant, kW 400
Quality
certificates
Products
in stock
Individual configuration
with prices for each item
Mobile
commissioning team
available
Worldwide
delivery
in trucks or containers
Call, hotline in Belarus
Our managers will answer all your questions from Monday till Friday:
from 06:00 a.m. to 05:00 p.m. (GMT+3, Moscow time)
Address: Republic of Belarus, 220073, Minsk, st. Olshevskogo, 20, office. 38a
e-mail: sales@zzbo.ru
Denis Zhilyakov
Director of the branch in the Republic of Belarus
Phone: +7 (951) 230-90-16
e-mail: sales@zzbo.ru
Place your order
We will send you the price,
conditions and terms of delivery
Response within 1 hour
You will get the offer with
individual delivery and payment conditions