LENTA-72 Concrete Plant
412 271 The village




Enquire conditions
and delivery time

We'll call you back within 15 minutes

Specify your requirements

Send prices and terms of delivery
136 000 The village
- BP-2G-1500 Twin-shaft concrete mixer
- Pneumolock double
- Connection set for pneumatic equipment
- Armor shift flake type. Material: cast iron wear 16 mm
- Спицы усиленные (стальное литье) крепление типа "кулак"
- Changeable blades. Material: ЧХ16Н2Т cast iron (chromic high alloy wear-resistant)
- Automatic central lubrication system
- Electricity to connect the remote control
- Maintenance kit (three armor, blade, needle)
- Concrete mixer machinery certificate
43 627 The village
- Belt conveyor assembly: 18 m long, 800 mm wide
- Drive: 15 kW gear motor
- Receiving hopper
- Mounting frame. 25 degrees inclination
- The drum leader. ⌀ 420 mm, width 950 mm
- The drum is driven. ⌀ 400 mm, width 950 mm
- Chevron belt, thickness - 8 mm
- Docking lock “BARGER” (Russia)
- The roller support is grooved (paint and varnish coating). ⌀ 60 mm
- Supporting rollers. ⌀ 60 mm
- Guide rollers. ⌀ 60 mm
- Passport and instruction manual for the conveyor
26 413 The village
- Overpass E 07.00.000. Design enhanced, adapted for the discharge of concrete on the height of 4000 mm
- mixer platform with supporting structures
- Ladders for equipment maintenance
- Fence along the perimeter
- Staircase with handrails
- Funnel for unloading concrete with rubber guide
- Fastening construction for pipes and electric cables
- Hardware for the assembly trestle
- Coating: shotblasting, double coloration with drying chamber
- Total weight - 2173 kg
121 587 The village
- Aggregate bins (3 x 20). Total volume 60 m³
- Preparation under registers installation for heating inert materials
- Sector valves, with control of pneumatic cylinders - 6 pcs.
- Pneumatic equipment - 6 electro-pneumatic distributors, a set of fittings and tubes, 6 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE3003 - 6 pcs.
- The support frame, installation without foundation
- Dispenser inert CI-9 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Zink plated rollers
- S-shaped load cells for 2 tons - 4 pcs.
- CAS connecting box
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
Receiver volume 200 l., pr-t 553 lmin The village
- Mounting frame (powder coating). Weight - 200 kg
- Cement dispenser, dosage - 600 kg (powder coating):
- Three inlet pipes for augers (Two are covered with lids)
- Connecting outer sheath with collar clamps
- Overpressure system
- Unloading disc damper ∅200
- Strain gauges - 3 pcs.
- Signal amplifier - weight sensor
- Pneumatic distributors - 4 pcs.
- Vibrator MVE41 - 1 pc.
- Water dispenser, dosage - 300 liters (powder coating):
- Strain gauges - 3 pcs.
- Water dump pump
- Water and chemical agents multipoint injection system
- Signal amplifier - weight sensor
- Chemical additives dispenser, dosage - 40 liters, made of stainless steel:
- Strain gauges - 2 pcs.
- Ball pneumatic damper ∅50 - 2 pcs.
- Ball pneumatic valve ∅25 - 1 pc.
- Signal amplifier - weight sensor
36 027 The village
- Software on your own SCADA system complete with a monoblock: accounting for the consumption of materials and equipment operation, remote access and control over the work in the local network
- Automatic operation by pressing "one" button
- Recipe storage database for concrete production
- Programmable Logic Controller
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- Control, protective and switching equipment "Omron", "Siemens"
- Set of diagrams and instruction manual
16 582 The village
- Hardware for assembly RBU: metering complex overpass screw silage
- Hardware, accessories
- Wire for screw fixing
- Kit for connecting the database (pnevmotruba, sleeves, bends, RVC 51-70 clamps, duct PVC-5-C-60)
- Limit switch for the database
- Kit vodopodvedeniya (pipe bends, sleeves, T-joints, anchor bolts, brackets)
- Kit RBU pneumatic (air tubing, pnevmotruba, fittings, hardware)
- Set of cables
- Couplings (5 titles)
- compactor
- Acid sealant TempPlus
- Power and control cables, protected by metal hose (in mobile plants they are laid in frame)
- Set of locking sensors and executing mechanisms position sensors (skip, mixer's gate, etc.)
128 320 The village
- Twin-shaft concrete mixer MSO 1750
- Multi-channel uniform water spray system
- Replaceable wear-resistant Ni-Hard cast iron armor, strength 500 HB
- Pneumatic gate - two-side
- Connection set for pneumatic equipment
134 422 The village
- Planetary concrete mixer MPC 1500
- Mixer drive - 45 kW
- Replaceable wear-resistant armor made of cast iron with a strength of 500HB
- The sector valve with rubber seal is equipped with a hydraulic drive with the possibility of manual opening
- Inspection hatches are equipped with an access security system
121 587 The village
- Aggregate bins (3 x 20). Total volume 60 m³
- Preparation under registers installation for heating inert materials
- Sector valves, with control of pneumatic cylinders - 6 pcs.
- Pneumatic equipment - 6 electro-pneumatic distributors, a set of fittings and tubes, 6 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE3003 - 6 pcs.
- The support frame, installation without foundation
- Dispenser inert CI-9 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Zink plated rollers
- S-shaped load cells for 2 tons - 4 pcs.
- CAS connecting box
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
157 982 The village
- Bunkers of inert BI-80 (4 x 20) - 8 sections. The total volume is 80 cubic meters. meters
- Preparation under registers installation for heating inert materials
- Pneumatic equipment - 8 electric pneumatic distributors, a set of fittings and tubes, 8 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE 300/3 - 8 pcs.
- Dispenser inert CI-12 (conveyor) with the lined drive drum. Drive power 18,5 kW
- The soft starter, frequency converter
- Strain gauges - 6 pcs.
- CAS connecting box
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
25 222 The village
- Silo tank (V = 28 m3)
- Mounting frame
- Stairs
- Cover protection enclosure
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Machinery certificate
1 760 The village
- Pump PSTC 50-125/30 assembled for water supply
- Machinery certificate
1 751 The village
- The pump Calpeda MXH 202E assembled for chemical supply. additives
- Capacity - 80 liters/min
- Power - 0.33 kW
- Weight - 6.9 kg with packaging
- Machinery certificate
2 767 The village
- Lattice for hopper section 70x70 for DKM-36 - DKM-36.10.000
7 262 The village
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- One window (PVC, double glazing), insulated door with lock
- Lighting
- Slinging loops
- Weight - 180 kg
18 676 The village
- Auger assembly
- Pipe Diameter 219 mm Pipe Length 11 500 mm
- Drive: motor-reducer. Power 11 kW
- Inspection window for cleaning and maintenance
- Operational documentation
40 578 The village
- Silo Tank (V = 50 m3): cover - 4 sectors, cylindrical section - 12 sectors, large cone - 4 sectors, small cone
- Mounting frame
- Stairs
- Cover protection enclosure - 11 sectors
- Loading pipe d 102 with connection lock
- Inspection hatch (Viewing window for inspection and cleaning of the cone)
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Frame for transportation
- Hardware for the assembly of a silo
- Polyurethane sealant Soudaflex FC 40 gray 600ml - 9 tubes
- Machinery certificate
15 978 The village
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Air conditioning
- Operator table
- Operator's chair
- Heater 2kW
- Slinging loops
- Weight 280 kg
782 The village
- Butterfly valve DN300
- Handle for gate control
- Operational documentation
471 The village
- Cement level sensor G2 1/2 220V assy in a package
- Adjusting ring
- Operational documentation
4 622 The village
- Cement filter with vibration cleaning FCS-24 NEON assembled
- Filter elements - 14 pieces
- Stainless alloy steel body
- Vibrator - cartridge vibration cleaning system
- Silage setting ring
- Lid
- Machinery certificate
893 The village
- Emergency pressure relief valve PV273 assy
- Adjusting ring
- Operational documentation
CBP operation mode - fully automatic on the principle of "single button".
BP-2G-1500 Twin-shaft concrete mixer is installed on the elevated structure with the discharge height - 4 m. Concrete mixing plant is equipped with a chevron belt conveyor for lifting and loading of the aggregates into the mixer.
ZZBO is the official dealer of SICOMA concrete mixers in Russia and the CIS!
It is possible to supply a concrete plant with a concrete mixer from the manufacturer SICOMA.
For storage and precise batching of the inert materials dosing complex DKM-40. Возможна поставка бункеров увеличенного объема (до 72 куб. метров). Инертные загружаются и хранятся в бункерах, количество бункеров 2 по 20 куб. метра, общий объем бункеров 40 куб. метров. Под бункерами установлен ленточный конвейер-дозатор, на котором происходит точное дозирование компонентов, компоненты подаются из бункеров посредством открытия шиберных заслонок, заслонки управляются пневмосистемой.
Upon achievement of the required batch of the inert materials, the conveyor is turned on and they are discharged into the belt conveyor's receiving hopper and after that into the mixer.
Protect inert materials from precipitation using Shelter of the strip conveyor!
The cement is stored in a special warehouse - cement silo (not included in the basic package). Silos for cement must be selected the rate of two daily stock performance. For feeding cement from a cement silo dispenser must acquire the correct length screw.
Cement silos, silo piping and augers are always in stock in Zlatoust!
С помощью шнека цемента подается в блок дозаторов БД-60, который состоит из дозатора цемента на 600 кг, воды на 300 литров и дозатора химической добавки на 40 литров. Каждый дозатор расположен на трех высокоточных тензодатчиках и жесткой раме, что повышает точность дозирования. Дозатор цемента снабжен вибратором MVE 300/3 для побуждения схода цемента при его залипании.
All components of the mixture are mixed, after obtaining the necessary homogeneity of the mixture, the pneumatic valve of the concrete mixer is opened and the mixture is supplied to the concrete mixer truck or receiving hopper.
Then the cycle is repeated.
One cycle lasts for about 50 seconds during which 1 cu m of ready-to-use concrete is produced. LENTA-72 capacity is 50-72 cu m per hour of operation.
- CBP capacity: 72 cu m per hour
- Twin-shaft concrete mixer with belt conveyor
- Software on our own SCADA system complete with a monoblock: accounting of material consumption and equipment operation, remote access and control over the work
- Transportation in 2 euro trucks
- 2 year full warranty
Technical Features
- Capacity, cu m per hour 50...72
- Automatic operating mode
- BP-2G-1500 Concrete mixer
- Bunkers (number x volume m3) 2 x 20
- Silo capacity (optional), tons 22...315
- Pneumatic equipment (Italy)
- ABAC Pole Position L20P Compressor (Italy) SB4/F-270.LB50-5.5
- Design summer
- Load of inert materials into the concrete mixer belt conveyor
- Total power, kW 73.9
- Sector gate, pneumatic control
- Dimensions of the basic configuration:
- Weight, kg 17200
- Height, mm 8449
- Width, mm 3700
- Length, mm 26662

Quality
certificates

Products
in stock

Individual configuration
with prices for each item

Mobile
commissioning
available

Worldwide
delivery
in trucks or containers
Geography of supplies 2011-2024
Own production, in-stock products and
professional team allow us guarantee
most competitive prices, shortest
possible delivery time and high-quality goods
Call, hot line in Belarus
Our managers will answer all your questions from Monday till Friday:
from 06:00 a.m. to 05:00 p.m. (GMT+3, Moscow time)
Address: Republic of Belarus, 220073, Minsk, st. Olshevsky, d. 20, office. 38a
e-mail: sales@zzbo.ru


Denis Zhilyakov
Director of a branch in the Republic of Belarus
Phone: +7 (951) 230-90-16
e-mail: sales@zzbo.ru
Place your order
We will send you the price,
conditions and terms of delivery

Response within 1 hour

You will get the offer with
individual delivery and payment conditions