SKIP-90 Concrete Plant
443 351 The village




Enquire conditions
and delivery time

We'll call you back within 15 minutes

Specify your requirements

Send prices and terms of delivery
195 364 The village
- Twin-shaft concrete mixer for 2250 liters
- Frame for skip hoist installation
- Skip displacement of 2.5 cc. m
- The winch drive - 22 kW with electro-brake
- Pneumolock double
- Connection set for pneumatic equipment
- Armor shift flake type. Material: cast iron wear 16 mm
- Спицы усиленные (стальное литье) крепление типа "кулак"
- Changeable blades. Material: ЧХ16Н2Т cast iron (chromic high alloy wear-resistant)
- Automatic central lubrication system
- Electricity to connect the remote control
- Maintenance kit (three armor, blade, needle)
- Concrete mixer machinery certificate
31 173 The village
- Overpass E 10 00.000. Design enhanced, adapted for the discharge of concrete on the height of 4000 mm
- mixer platform with supporting structures
- Ladders for equipment maintenance
- Fence along the perimeter
- Staircase with handrails
- Funnel for unloading concrete with rubber guide
- Skip ways - rails
- Fastening construction for pipes and electric cables
- Hardware for the assembly trestle
- Coating: shotblasting, double coloration with drying chamber
- Total weight - 2775 kg
121 587 The village
- Aggregate bins (3 x 20). Total volume 60 m³
- Preparation under registers installation for heating inert materials
- Sector valves, with control of pneumatic cylinders - 6 pcs.
- Pneumatic equipment - 6 electro-pneumatic distributors, a set of fittings and tubes, 6 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE3003 - 6 pcs.
- The support frame, installation without foundation
- Dispenser inert CI-9 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Zink plated rollers
- S-shaped load cells for 2 tons - 4 pcs.
- CAS connecting box
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
31 280 The village
- Mounting frame (powder coating). Weight - 200 kg
- Cement dispenser, dosage - 900 kg (powder coating):
- Three inlet pipes for augers (Two are covered with lids)
- Connecting outer sheath with collar clamps
- Overpressure system
- Unloading disc damper ∅200
- Strain gauges - 3 pcs.
- Signal amplifier - weight converter - 3 pcs.
- Pneumatic distributors - 4 pcs.
- Vibrator MVE41 - 1 pc.
- Water dispenser, dosage - 450 liters (powder coating):
- Strain gauges - 3 pcs.
- Unloading disc pneumatic valve ∅80 - 1 pc.
- Water dump pump
- Controlled water and chemical supply system
- Chemical additives dispenser, dosage - 60 liters, made of stainless steel:
- Strain gauges - 2 pcs.
36 027 The village
- Software on your own SCADA system complete with a monoblock: accounting for the consumption of materials and equipment operation, remote access and control over the work in the local network
- Automatic operation by pressing "one" button
- Recipe storage database for concrete production
- Programmable Logic Controller
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- Control, protective and switching equipment "Omron", "Siemens"
- Set of diagrams and instruction manual
19 556 The village
- Hardware for assembly RBU: metering complex overpass screw silage
- Hardware, accessories
- Wire for screw fixing
- Kit for connecting the database (pnevmotruba, sleeves, bends, RVC 51-70 clamps, duct PVC-5-C-60)
- Limit switch for the database
- Kit vodopodvedeniya (pipe bends, sleeves, T-joints, anchor bolts, brackets)
- Kit RBU pneumatic (air tubing, pnevmotruba, fittings, hardware)
- Set of cables
- Couplings (5 titles)
- compactor
- Acid sealant TempPlus
- Power and control cables, protected by metal hose (in mobile plants they are laid in frame)
- Set of locking sensors and executing mechanisms position sensors (skip, mixer's gate, etc.)
186 853 The village
- Planetary concrete mixer MPC 2250
- Mixer drive - 74 kW
- Replaceable wear-resistant armor made of cast iron with a strength of 500HB
- The sector valve with rubber seal is equipped with a hydraulic drive with the possibility of manual opening
- Inspection hatches are equipped with an access security system
146 049 The village
- Twin-shaft concrete mixer MAO 2250
- Multi-channel uniform water spray system
- Replaceable wear-resistant Ni-Hard cast iron armor, strength 500 HB
- Pneumatic gate - two-side
- Connection set for pneumatic equipment
157 982 The village
- Bunkers of inert BI-80 (4 x 20) - 8 sections. The total volume is 80 cubic meters. meters
- Preparation under registers installation for heating inert materials
- Pneumatic equipment - 8 electric pneumatic distributors, a set of fittings and tubes, 8 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE 300/3 - 8 pcs.
- Dispenser inert CI-12 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Strain gauges - 6 pcs.
- CAS connecting box
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
11 160 The village
- Lattice on the section of the bunker 70x70 for DKM-80 (DKM-60) - DKM-80.23.000-02-T
7 440 The village
- Lattice on the bunker section 100x100 for DKM-80 (DKM-60) - DKM-80.23.000-01-T
7 262 The village
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- One window (PVC, double glazing), insulated door with lock
- Lighting
- Slinging loops
- Weight - 180 kg
1 751 The village
- The pump Calpeda MXH 202E assembled for chemical supply. additives
- Capacity - 80 liters/min
- Power - 0.33 kW
- Weight - 6.9 kg with packaging
- Machinery certificate
15 978 The village
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Air conditioning
- Operator table
- Operator's chair
- Heater 2kW
- Slinging loops
- Weight 280 kg
65 676 The village
- Silo tank (V = 105 m3): cover - 4 sectors, cylindrical section - 28 sectors, large cone - 4 sectors, small cone
- Mounting frame
- Stairs
- Cover protection enclosure - 11 sectors
- Loading pipe d 102 with connection lock
- Inspection hatch (Viewing window for inspection and cleaning of the cone)
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Frame for transportation
- Hardware for the assembly of a silo
- Polyurethane sealant Soudaflex FC 40 gray 600 ml - 15 tubes
- Machinery certificate
21 191 The village
- Auger assembly
- Pipe Diameter 273 mm, tube length of 12 000 mm
- Drive: gear motor. Power 15 kW
- Inspection window for cleaning and maintenance
- Operational documentation
60 133 The village
- Silo bank (V=103m³)
- Mounting frame
- Stairs
- Cover protection enclosure
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Machinery certificate
78 409 The village
- Silo tank (V = 118 m3)
- Cylindrical section - 12 sectors, cover - 6 sectors
- Cone big - 6 sectors, middle cone - 4 sectors, small cone
- Mounting frame
- Stairs
- Cover protection enclosure - 17 sectors
- Loading pipe d 102 with connection lock
- Inspection hatch (Viewing window for inspection and cleaning of the cone)
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Frame for transportation
- Hardware for the assembly of a silo
- Polyurethane sealant Soudaflex FC 40 gray 600 ml - 14 tubes
- Machinery certificate
2 422 The village
- Pump PSTC 65-125/75 assembled for water supply
- Machinery certificate
782 The village
- Butterfly valve DN300
- Handle for gate control
- Operational documentation
471 The village
- Cement level sensor G2 1/2 220V assy in a package
- Adjusting ring
- Operational documentation
4 622 The village
- Cement filter with vibration cleaning FCS-24 NEON assembled
- Filter elements - 14 pieces
- Stainless alloy steel body
- Vibrator - cartridge vibration cleaning system
- Silage setting ring
- Lid
- Machinery certificate
893 The village
- Emergency pressure relief valve PV273 assy
- Adjusting ring
- Operational documentation
CBP operation mode - fully automatic on the principle of "single button".
BP-2G-2250s Twin-shaft concrete mixer It is installed on the flyover, at the height of unloading the finished mixture of 4 meters. The concrete mixer is equipped with a special bucket (skip) for lifting and loading the components of the mixture into the concrete mixer. The concrete mixer is equipped with imported components: LikeDrive planetary gearboxesand the electrodesvigatel.
Skip mixer has a bottom gate to reduce dust and increase discharge rate.
For storage and precise batching of the inert materials metering complex DCM-60. It is possible to supply bunkers of increased volume (up to 120 cubic meters). Inert are loaded and stored in bunkers, the number of bunkers 3 each 20 cubic meters. meters, the total volume of bunkers 60 cubic meters. meters. Under the bunkers, a conveyor conveyor is installed under which accurate dosing of the components occurs, the components are supplied from the bunkers by opening the gate shutters, the damper is controlled by the pneumatic system.
When the required dose of inerts has been collected, the conveyor is turned on and the dosed components are fed into the skip (bucket) of the concrete mixer. The skip rises and delivers the components into the mixing chamber of the concrete mixer.
Cement is stored in a special warehouse - a cement silo (not included in the basic package). Silos for cement must be selected based on a two-day performance margin. To supply cement from the silo to the cement dispenser, it is necessary to acquire the correct length screw.
Cement silos, silo piping and augers are always in stock in Zlatoust!
To feed cement from the silo into the cement dispenser there used cement auger, Dispenser assembly 90 DB, which consists of cement batcher 900 kg, 300 liters of water and a chemical additive dispenser 40 liters.
Each dispenser is located on three high -precision tensodes and a hard frame, which increases the accuracy of dosing. The cement dispenser is equipped with the MVE 300/3 vibrator to encourage cement mating when he is sticking.
All components of the mixture are mixed, after obtaining the necessary homogeneity of the mixture, the pneumatic valve of the concrete mixer is opened and the mixture is supplied to the concrete truck or receiving hopper. Then the cycle repeats.
One cycle lasts for 60 seconds maximum during which 1.5 cu m of ready-to-use concrete is produced. Plant's capacity is 60-90 cu m per hour of operation.
ZZBO is the official dealer of SICOMA concrete mixers in Russia and the CIS!
It is possible to supply a concrete plant with a concrete mixer from the manufacturer SICOMA.
- Capacity: up to 90 cu m per hour
- Software on our own SCADA system complete with a monoblock: accounting of material consumption and equipment operation, remote access and control over the work
- Transportation in 2 euro trucks
- Reliable imported components
- 2 year full warranty
Technical Features
- Capacity, cu m per hour 60...90
- Automatic operating mode
- BP-2G-2250s Concrete mixer
- Bunkers (number x volume m3) 3 x 20
- Cement silo, t (optional) 75...315
- Pneumatic equipment (Italy)
- ABAC Pole Position L20P Compressor (Italy)
- Design summer
- Load of inert materials into the concrete mixer skip
- Total power, kW 84.9
- Sector gate, pneumatic control
- Dimensions of the basic configuration:
- Weight, kg 21200
- Height, mm 9327
- Width, mm 3700
- Length, mm 19400

Quality
certificates

Products
in stock

Individual configuration
with prices for each item

Mobile
commissioning
available

Worldwide
delivery
in trucks or containers
Geography of supplies 2011-2024
Own production, in-stock products and
professional team allow us guarantee
most competitive prices, shortest
possible delivery time and high-quality goods
Call, hot line in Belarus
Our managers will answer all your questions from Monday till Friday:
from 06:00 a.m. to 05:00 p.m. (GMT+3, Moscow time)
Address: Republic of Belarus, 220073, Minsk, st. Olshevsky, d. 20, office. 38a
e-mail: sales@zzbo.ru


Denis Zhilyakov
Director of a branch in the Republic of Belarus
Phone: +7 (951) 230-90-16
e-mail: sales@zzbo.ru
Place your order
We will send you the price,
conditions and terms of delivery

Response within 1 hour

You will get the offer with
individual delivery and payment conditions