Products
LENTA-18 Concrete Plant
198 960 BYN
Price depends on the exchange rate
Worldwide shipping
2-year warranty
Plant passport, PDF
Enquire conditions
and delivery time
We'll call you back within 15 minutes
Specify your requirements
Send prices and terms of delivery
33 924 BYN
- BP-2G-375 Twin-Shaft Concrete Mixer
- Пневмозавтор "Camozzi" (Италия)
- Connection set for pneumatic equipment
- Changeable armour, flake type. Material – wear-resistant cast iron 12 mm thick
- Спицы усиленные (стальное литье) крепление типа "кулак"
- Changeable blades. Material: ЧХ16Н2Т cast iron (chromic high alloy wear-resistant)
- Water equilibrium distribution device
- Electricity to connect the remote control
- Maintenance kit (three armor, blade, needle)
- Purchased parts machinery certificates
- Concrete mixer machinery certificate
38 791 BYN
- Belt conveyor assembly: 16 m long, 600 mm wide
- Drive: 7,5 kW gear motor
- Receiving hopper
- Mounting frame. 25 degrees inclination
- Барабан ведущий с футеровкой. ⌀ 390 мм, ширина 640 мм
- Барабан ведомый. ⌀ 377 мм, ширина 640 мм
- Chevron belt, thickness - 6 mm
- Замок стыковочный «Alligator» (США)
- Grooved roller support (paint and varnish coating). ⌀ 57 mm
- Support rollers. ⌀ 57 mm
- Guide rollers. ⌀ 57 mm
- Machinery certificate
14 818 BYN
- Overpass E 09.00.000. Design enhanced, adapted for the discharge of concrete on the height of 4000 mm
- mixer platform with supporting structures
- Ladders for equipment maintenance
- Fence along the perimeter
- Staircase with handrails
- Funnel for unloading concrete with rubber guide
- Fastening construction for pipes and electric cables
- Hardware for the assembly trestle
- Coating: shotblasting, double coloration with drying chamber
- Total weight - 1407 kg
20 342 BYN
- Mounting frame (powder coating). Weight - 100 kg
- Cement dispenser, dosage - 150 kg (powder coating):
- Two inlet nozzles for screw conveyors (one is covered by a cap)
- Connecting outer sheath with collar clamps
- Overpressure system
- Unloading disc damper ∅200
- CAS BСA100 strain sensors - 3 pieces
- Signal amplifier - weight sensor
- Pneumatic valves - 3 pieces
- Vibrator MVE 300/3 - 1 piece
- Water dispenser, dosage - 75 liters (powder coating):
- CAS BСA100 strain sensors - 3 pieces
- CAMOZZI d 50 discharging ball pneumatic damper
- Signal amplifier - weight sensor
- Chemical additive dispenser, dosage -10 liters, made of stainless steel:
- CAS BСA100 strain sensor - 1 piece
- CAMOZZI d 25 discharging ball pneumatic damper
- Signal amplifier - weight sensor
59 160 BYN
51 852 BYN
- Bunkers-inert BI-16 (2 x 8) - 2 sections. The total volume is 16 cubic meters. meters
- Preparation under registers installation for heating inert materials
- Sector valves, with control of pneumatic cylinders - 2 pcs.
- Pneumatic equipment - 2 electric pneumatic distributors, a set of fittings and tubes, 2 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Вибратор MVE300\3 - 2 шт.
- The support frame, installation without foundation
- Дозатор инертных ДИ-6 (конвейер) с футерованным приводным барабаном. Мощность привода 5,5 кВт
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 4 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
215 821 BYN
- Semi-automatic or manual operation mode
- Buffer for storing concrete recipes in memory - 200 pieces
- Remote access and control over the operation, via Web interface
- Programmable Logic Controller
- Сенсорная панель управления. Диагональ 10,1 дюйма, широкий угол обзора, TFT-экран, разрешение 1024х600, цветность 16,7 млн
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- Управляющая, защитная и коммутационная аппаратура «Schneider Electric», «ABB»,«Siemens»
- Manual control panel with ingress protection buttons on mimic panel
- Set of diagrams and instruction manual
- Hardware for assembly RBU: metering complex overpass screw silage
- Hardware, accessories
- Wire for screw fixing
- Kit for connecting the database (pnevmotruba, sleeves, bends, RVC 51-70 clamps, duct PVC-5-C-60)
- Limit switch for the database
- Kit vodopodvedeniya (pipe bends, sleeves, T-joints, anchor bolts, brackets)
- Kit RBU pneumatic (air tubing, pnevmotruba, fittings, hardware)
- Set of cables
- Couplings (5 titles)
- compactor
- Acid sealant TempPlus
- Power and control cables, protected by metal hose (in mobile plants they are laid in frame)
- Set of locking sensors and executing mechanisms position sensors (skip, mixer's gate, etc.)
10 716 BYN
- Operating mode manual
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- Control, protection and switching equipment "Schneider Electric", "Omron", "ABB", "Siemens"
- Manual control panel with ingress protection buttons on mimic panel
- Set of diagrams and instruction manual
62 329 BYN
55 519 BYN
- Planetary counter-current concrete mixer BPP-3V-375
- Mixer drive planetary 11 kW
- Concrete unloading gate. Drive - hydraulic cylinder
- pressure regulator
- Replaceable scaly-type armor. Material: steel
- Mixer cover with viewing window
- Secure access system
- Spokes reinforced
- Changeable blades. Material: ЧХ16Н2Т cast iron (chromic high alloy wear-resistant)
- Electricity to connect the remote control
- Water treatment system with water spray nozzles
- Concrete mixer machinery certificate
4 044 BYN
- RMK-2M washer
- Mounting frame
- Service ladder
- Protective cover of precipitation
- Dispenser capacity 2.35 tons of cement
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Knife material: high quality tool steel
- Machinery certificate
30 609 BYN
- Lower frame
- Upper frame
- Upper structure for enlarging of loading height
- Sealing protective membrane
- Cutting system made of instrument steel
- Inspection window
- Support screw
- Protective grid
- Vibration mounts – 4 pieces
- Vibrator MVE-3003 - 1 piece
- E. hoist - lifting capacity of 2 tons, 3 kW
- Hoist control board
- Big bags griping cross-beam
- Set of hardware for assembly
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Machinery certificate
74 867 BYN
66 667 BYN
- Bunker-inert BI-24 (3 x 8) - 3 sections. The total volume of 24 cc. meter
- Preparation under registers installation for heating inert materials
- Sector gates, controlled by pneumatic cylinders - 3 pcs.
- Pneumatic equipment - 3 electric pneumatic distributors, a set of fittings and tubes, 3 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Вибратор MVE 300/3 - 3 шт.
- The support frame, installation without foundation
- Dispenser inert CI-9 (conveyor) with the lined drive drum. Drive power 7.5 kW
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 4 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
28 711 BYN
- Silo tank (V = 28 m3)
- Mounting frame
- Stairs
- Cover protection enclosure
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Machinery certificate
3 413 BYN
- Насос Calpeda NM 40-12 FA в сборе для подачи воды
- Capacity - 550 liters/min
- 1.1 kW power
- Weight - 27 kg with packaging
- Machinery certificate
- Lattice on the section of the bunker 100x100 for DKM-80 (DKM-60) - DKS-16.09.000
1 751 BYN
- The pump Calpeda MXH 202E assembled for chemical supply. additives
- Capacity - 80 liters/min
- Power - 0.33 kW
- Weight - 6.9 kg with packaging
- Machinery certificate
6 622 BYN
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Slinging loops
- Weight - 180 kg
938 BYN
- Aeration jet - 6 pcs
- Assembly kit (fittings, tees, polyurethane tube, bracket, nipple, gasket, plug)
- Filter regulator - 1 pc.
- Ball valve G1/4 - 2pcs
- Axial pressure gauge, 0-2.5 bar - 1 pc.
- 3/2 distributor G1/4, unilateral. - 1 PC
- Solenoid - 1 pc
- Solenoid connector - 1 pc
1 069 BYN
- Aeration jet - 8 pcs
- Assembly kit (fittings, tees, polyurethane tube, bracket, nipple, gasket, plug)
- Filter regulator - 1 pc.
- Ball valve G1/4 - 2pcs
- Axial pressure gauge, 0-2.5 bar - 1 pc.
- 3/2 distributor G1/4, unilateral. - 1 PC
- Solenoid - 1 pc
- Solenoid connector - 1 pc
56 093 BYN
- Heat generator TGV-250 basic version
- Fan assembled with an electric motor type Fan VR 140-15 No. 8 version 1, 22 kW, 3000 rpm, left. 270. 380/660
- The automation system (control cabinet)
- chimney section
- Schild in the control cabinet
- Passport and Manual
34 856 BYN
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Air conditioning
- Operator table
- Operator's chair
- Heater 2kW
- Slinging loops
- Weight 280 kg
10 396 BYN
- Auger assembly
- Pipe Diameter 168 mm, tube length 9000 mm (folding consists of three parts 3, 3 and 3.35 meters, connects flange)
- Привод: мотор-редуктор. Мощность 5,5 кВт
- Inspection window for cleaning and maintenance
- Operational documentation
- RMK-2M washer
- Mounting frame
- Service ladder
- Protective cover of precipitation
- Dispenser capacity 2.35 tons of cement
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Knife material: high quality tool steel
- Machinery certificate
- Butterfly valve DN300
- Handle for gate control
- Operational documentation
449 BYN
- Cement level sensor G2 1/2 220V assy in a package
- Adjusting ring
- Operational documentation
- Cement filter AIRFILL25 assembly (Turkey) in a rigid package
- Cartridges pneumatic cleaning system
- Adjusting ring
- Operational documentation
- safety valve
- Adjusting ring
- Material - Carbon Steel
- Compound - a collar
- Passport to Safety Valve
3 622 BYN
- RMK-2M washer
- Mounting frame
- Service ladder
- Protective cover of precipitation
- Dispenser capacity 2.35 tons of cement
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Knife material: high quality tool steel
- Machinery certificate
- Emergency pressure relief valve PV273 assy
- Adjusting ring
- Operational documentation
Operating mode RBU - semi-automatic. Delivery of the plant with remote control PA3.0 - fully automatic mode on the principle of "one button".
BP-2G-375 Twin-Shaft Concrete Mixer is installed on the elevated structure with the discharge height - 4 m. LENTA-18 concrete mixing plant is equipped with a chevroned belt conveyor for lifting and loading of the aggregates into the mixer.
For storage and precise batching of the inert materials metering complex DKS-16. Возможна поставка бункеров увеличенного объема (до 72 куб. метров). Инертные загружаются и хранятся в бункерах, количество бункеров 2 по 8 куб. метра, общий объем бункеров 18 куб. метров. Под бункерами установлен ленточный конвейер-дозатор, на котором происходит точное дозирование компонентов, компоненты подаются из бункеров посредством открытия шиберных заслонок, заслонки управляются пневмосистемой “Camozzi”.
Upon achievement of the required batch of the inert materials, the conveyor is turned on and they are discharged into the belt conveyor's receiving hopper and after that into the mixer.
The cement is stored in a special warehouse - cement silo (not included in the basic package) or Растаривателя биг-бегов цемента РМК-2М (Optional) bags (FIBC, big bags). Silos for cement must be selected the rate of two daily stock performance. For feeding cement from a cement silo dispenser must acquire the correct length screw.
Cement silos, silo piping and augers are always in stock in Zlatoust!
From rastarivatelya or cement silo is fed via a screw conveyor a metering unit which consists of a cement batcher 150 kg of water to 75 liters and a chemical additive dispenser 10 liters.
Каждый дозатор расположен на трех высокоточных тензодатчиках “CAS” и жесткой раме, что повышает точность дозирования. Дозатор цемента снабжен вибратором MVE 300/3 для побуждения схода цемента при его залипании.
Batched aggregates are fed into the mixer where they are being mixed. Upon achievement of the required homogeneity of the mixture, Camozzi pneumatically operated gate is opened, and the mixture is discharged into a concrete mixer lorry or a receiving hopper. Then the cycle is repeated.
One cycle lasts for 50 seconds maximum during which 0.25-0.3 cu m of ready-to-use concrete is produced. LENTA-18 capacity is 12-18 cu m per hour of operation.
Возможна поставка бетонного завода в защитном покрытии цинк. Покрытие наносится методом холодного цинкования.
- Capacity: 18 cu m per hour
- Twin-shaft mixer, belt conveyor for inert materials feeding
- The semi-automatic remote PLA
- Transportation 1.5 eurowaggon to the installation site
- 2 year full warranty
Technical Features
- Capacity, cu m per hour 10...18
- Semi-automatic operating mode
- BP-2G-375 Concrete mixer
- Bunkers (number x volume m3) 2 x 8
- Silo capacity (optional), tons 22...315
- Pneumatic equipment (Italy) CAMOZZI
- ABAC Pole Position L20P Compressor (Italy) ABAC
- Design summer
- Load of inert materials into the concrete mixer belt conveyor
- Total power, kW 37.4
- Sector gate, pneumatic control
- Weight, kg 7,500
- Height, mm 7296
- Width, mm 3,600
- Length, mm 31605
Quality
certificates
Products
in stock
Individual configuration
with prices for each item
Mobile
commissioning team
available
Worldwide
delivery
in trucks or containers
Geography of deliveries 2011-2023
Own production, in-stock products and
professional team allow us guarantee
most competitive prices, shortest
possible delivery time and high-quality goods
Звоните, горячая линия в Белоруссии
Our managers will answer all your questions from Monday till Friday:
from 06:00 a.m. to 05:00 p.m. (GMT+3, Moscow time)
Address: Республика Беларусь, 220073, г. Минск, ул. Ольшевского, д. 20, каб. 38а
e-mail: sales@zzbo.ru
Denis Zhilyakov
Директор филиала в республике Беларусь
Phone: +7 (951) 230-90-16
e-mail: sales@zzbo.ru
Place your order
We will send you the price,
conditions and terms of delivery
Response within 1 hour
You will get the offer with
individual delivery and payment conditions
