LENTA-106 Concrete Plant
277 240 BYN




Enquire conditions
and delivery time

We'll call you back within 15 minutes

Specify your requirements

Send prices and terms of delivery
122 640 BYN
- BP-2G-2250 Twin-shaft concrete mixer
- Пневматический затвор двойной "Camozzi"
- Connection set for pneumatic equipment
- Броня сменная чешуйчатого типа. Толщина брони 16 мм. Материал: Чугун ЧХ16Н2
- Changeable blades. Material: ЧХ16Н2Т cast iron (chromic high alloy wear-resistant)
- Автоматическая централизованная система смазки "BEKA" (Германия)
- Electricity to connect the remote control
- Maintenance kit (three armor, blade, needle)
- Concrete mixer machinery certificate
30 867 BYN
- Belt conveyor assembly: 18 m long, 800 mm wide
- Drive: 15 kW gear motor
- Receiving hopper
- Mounting frame. 25 degrees inclination
- Lined lead drum. Diameter - 390 mm, width - 840 mm
- Driven drum. Diameter - 377 mm, width - 840 mm
- Chevron belt, thickness - 8 mm
- Замок стыковочный "Alligator" (США)
- Grooved roller carriage (zinc-plated rollers). Diameter - 57 mm, 75 pieces
- Support rollers (zinc-plated). Diameter - 57 mm, 8 pieces
- Directing rollers (zinc-plated). Diameter - 57 mm, 18 pieces
- Machinery certificate
13 650 BYN
- Overpass E 10.00.000. Design enhanced, adapted for the discharge of concrete on the height of 4000 mm
- mixer platform with supporting structures
- Ladders for equipment maintenance
- Fence along the perimeter
- Staircase with handrails
- Funnel for unloading concrete with rubber guide
- Fastening construction for pipes and electric cables
- Hardware for the assembly trestle
- Coating: shotblasting, double coloration with drying chamber
- Total weight - 2243 kg
56 807 BYN
- Bunker-inert BI-60 (3 x 20) - 3 sections. The total volume of 60 cc. meter
- Preparation under registers installation for heating inert materials
- Секторные затворы, с управлением пневмоцилиндрами "Camozzi" (Италия) - 6 шт.
- Пневмооборудование "Camozzi" (Италия) - 6 электропневмораспределителей, комплект фитингов и трубок, 6 клапанов быстрого выхлопа, 1 пневморегулятор, фильтр с манометром
- Вибратор "OLI" MVE300\3 (Италия) - 6 шт.
- The support frame, installation without foundation
- Dispenser inert CI-9 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 4 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
23 627 BYN
- Mounting frame (powder coating). Weight - 200 kg
- Cement dispenser, dosage - 900 kg (powder coating):
- Two inlet nozzles for screw conveyors (one is covered by a cap)
- Connecting outer sheath with collar clamps
- Overpressure system
- Разгрузочная дисковая пневмозаслонка "Camozzi" ∅200
- CAS BSA500 strain sensors - 3 pieces
- Signal amplifier - weight sensor
- Пневмораспределители "Camozzi" (Италия) - 3 штуки
- OLI MVE 21 vibrator - 1 piece
- Water dispenser, dosage - 450 liters (powder coating):
- CAS BSA500 strain sensors - 3 pieces
- Разгрузочная шаровая пневмозаслонка ∅50 "Camozzi"
- Calpeda NM 65-16 CB Pump
- Water and chemical agents multipoint injection system
- Signal amplifier - weight sensor
- Chemical additives dispenser, dosage - 60 liters, made of stainless steel:
- CAS BСA100 strain sensor - 1 piece
- Разгрузочная шаровая пневмозаслонка ∅50 "Camozzi"
- Signal amplifier - weight sensor
6 900 BYN
- Abac 7000-500 FT10 Compressor assembly
- Manufacturer - ABAC (Italy)
- Receiver - 500 liters
- Performance 1210 l min
- Power - 7.5 kW
- Режим работы полностью автоматический "одна" кнопка
- Buffer for storing concrete recipes in memory - 200 pieces
- Software: accounting of material consumption and equipment operation
- Контроллер "Omron" (Япония) серии CP1L
- Сенсорная панель управления "Omron" (Япония) серии NB. Диагональ 10,1 дюйма, широкий угол обзора, TFT-экран, 65 000 цветов.
- The control system to achieve homogeneity of the mixture and its mobility
- Transcend Flash Drive 4Gb
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- The control, protection and switching equipment «Schneider Electric» (France)
- Manual control panel with ingress protection buttons on mimic panel
- Set of diagrams and instruction manual
- Hardware for assembly RBU: metering complex overpass screw silage
- Hardware, accessories
- Wire for screw fixing
- Kit for connecting the database (pnevmotruba, sleeves, bends, RVC 51-70 clamps, duct PVC-5-C-60)
- Limit switch for the database
- Kit vodopodvedeniya (pipe bends, sleeves, T-joints, anchor bolts, brackets)
- Kit RBU pneumatic (air tubing, pnevmotruba, fittings, hardware)
- Set of cables
- Couplings (5 titles)
- compactor
- Acid sealant TempPlus
- Power and control cables, protected by metal hose (in mobile plants they are laid in frame)
- Set of locking sensors and executing mechanisms position sensors (skip, mixer's gate, etc.)
14 307 BYN
- Шнек "SCUTTI" (Италия) в сборе
- Pipe Diameter 273 mm, tube length of 12 000 mm (sectional consists of four parts 3, 3.4, 2.6 and 3.45 meter connects flange)
- Привод: мотор-редуктор "SIEMENS" (Германия). Мощность 15 кВт, 285 об\мин
- The balanced shaft with spiral tselnovitoy
- Inlet connection - Adjustable Balloon
- Inspection window for cleaning and maintenance
- Shot peening, epoxy primer, acrylic-polyurethane enamel. Thickness: 100 microns
- Operational documentation
72 697 BYN
- Бункера-инертных БИ-80 (4 х 20) - 8 секций. Общий объем 80 куб. метра
- Preparation under registers installation for heating inert materials
- Секторные затворы, с управлением пневмоцилиндрами "Camozzi" (Италия) - 8 шт.
- Пневмооборудование "Camozzi" (Италия) - 8 электро пневмораспределителей, комплект фитингов и трубок, 8 клапанов быстрого выхлопа, 1 пневморегулятор, фильтр с манометром
- Вибратор "Oli" MVE300\3 (Италия) - 8 шт.
- The support frame, installation without foundation
- Dispenser inert CI-12 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 6 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
3 327 BYN
- Lattice with section 100x100 (70x70). Cell height 70 mm. Weight 575 kg
3 677 BYN
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Slinging loops
- Weight - 180 kg
17 000 BYN
- Burner diesel Baltur Spark 35 DSG W
- Manometer electrocontact DM2010Sg, 0-0,6MPa range
- Manometer showing the TM-510R.00, 0-0,6MPa range
- Safety valve 17s28nzh DN50 / 80, pH = 0.5 MPa
- Temperature sensor type Pt100 RTD
- Crane grooved ball DN15
- Crane grooved ball DN25
- Ruff for cleaning fire tubes
- chimney section (complete with 1 im with spark arrester and set of fasteners and gaskets)
- 600l volume of the fuel tank
- boiler control cabinet
- Passport and operating instructions on the boiler
- Burner diesel Baltur Spark 35 DSGW (Italy)
- Heat generator TGV-250 basic version
- Fan assembly with a fan motor type BP isp.1 6-13M-8, 22 kW, 3000 r / min, lion. 270. 380/660
- The automation system (control cabinet)
- chimney section
- Fuel tank with visual level control. Volume 600 l
- Schild in the control cabinet
- Passport and Manual
42 667 BYN
- Burner diesel Baltur TBL 85 P (Italy)
- Heat generator TGV-600 basic version
- Fan assembly with a VR type motor 6-20 №8, 37 kW, 3000 r / min, lion. 270. 380 / 660V
- The automation system (control cabinet)
- chimney section
- Fuel tank with visual level control. Volume 600 l
- Schild in the control cabinet
- Passport and Manual
19 333 BYN
- Gas burners Baltur TBG 35P ramp MM.407
- Manometer electrocontact DM2010Sg, 0-0,6MPa range
- Manometer showing the TM-510R.00, 0-0,6MPa range
- Safety valve 17s28nzh DN50 / 80, pH = 0.5 MPa
- Temperature sensor type Pt100 RTD
- Crane grooved ball DN15
- Crane grooved ball DN25
- Ruff for cleaning fire tubes
- chimney section (complete with 1 im with spark arrester and set of fasteners and gaskets)
- boiler control cabinet
- Passport and operating instructions on the boiler
- The shutter disk VFA300-LT
- Handle for gate control
- Operational documentation
- Режим работы полностью автоматический "одна" кнопка
- Buffer for storing concrete recipes in memory - 200 pieces
- SCADA software: accounting of the consumption of materials and volumes of manufactured products, dispatching of orders (invoices), recipe management, remote access to management and control over the plant operation (Target OS: Windows)
- Monoblock Windows 10
- Kyocera printer (analog)
- Flash Drive Transcend 4Gb (analogue)
- Контроллер "Omron" (Япония) серии CP1L
- Сенсорная панель управления "Omron" (Япония) серии NB. Диагональ 10,1 дюйма, широкий угол обзора, TFT-экран, 65 000 цветов.
- The control system to achieve homogeneity of the mixture and its mobility
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- The control, protection and switching equipment «Schneider Electric» (France)
- Manual control panel with ingress protection buttons on mimic panel
- Set of diagrams and instruction manual
48 900 BYN
- Silo tank (V = 118 m3)
- Cylindrical section - 12 sectors, cover - 6 sectors
- Cone big - 6 sectors, middle cone - 4 sectors, small cone
- Mounting frame
- Stairs
- Cover protection enclosure - 17 sectors
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Corrosion protection is made of two-component priming enamel based polyurethane-acrylic resin production Lankwitzer (Germany) in the spray-drying chamber ATIS
- Frame for transportation
- Hardware for the assembly of a silo
- Polyurethane sealant Soudaflex FC 40 gray 600 ml - 14 tubes
- Machinery certificate
34 300 BYN
- Silo tank (V = 105 m3): cover - 4 sectors, cylindrical section - 28 sectors, large cone - 4 sectors, small cone
- Mounting frame
- Stairs
- Cover protection enclosure - 11 sectors
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Corrosion protection is made of two-component priming enamel based polyurethane-acrylic resin production Lankwitzer (Germany) in the spray-drying chamber ATIS
- Frame for transportation
- Hardware for the assembly of a silo
- Polyurethane sealant Soudaflex FC 40 gray 600 ml - 15 tubes
- Machinery certificate
727 BYN
- CALPEDA MXH 202E Pump assembly (Italy) for chemical agents supply
- Capacity - 80 liters/min
- Power - 0.33 kW
- Weight - 6.9 kg with packaging
- Machinery certificate
7 500 BYN
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Air conditioning
- Operator table
- Operator's chair
- Heater 2kW
- Slinging loops
- Weight 280 kg
300 BYN
- Vibrator assembly, packed
- Disturbing force - 321 kg
- Machinery certificate
1 864 BYN
- Aeration nozzle IF-001-12 18 pcs
- Assembly kit (fittings, tees, polyurethane tube, bracket, nipple, gasket, plug)
- CAMOZZI filter regulator 1pc
- Ball valve G1 / 4 1 pc
- Axial pressure gauge, 0-12 bar 1pc
- 3/2 distributor CAMOZZI, G1 / 4, one-way. 1 PC
- Solenoid CAMOZZI A7E (220V-AC) 1pc
- A70 and G70 solenoid connector 122-800 1 pc
843 BYN
- RLB cement level indicator assembly
- Adjusting ring
- Operational documentation
657 BYN
- Valve VDS273 overpressure relief assembly
- Adjusting ring
- Operational documentation
5 443 BYN
- Фильтр цемента "MAXAIR-24" в сборе (Италия)
- Cartridges pneumatic cleaning system
- Operational documentation
12 713 BYN
- Lower frame
- Upper frame
- Upper structure for enlarging of loading height
- Sealing protective membrane
- Cutting system made of instrument steel
- Inspection window
- Support screw
- Protective grid
- Vibration mounts – 4 pieces
- Вибратор "OLI" MVE-300\3 - 1 штука
- E. hoist - lifting capacity of 2 tons, 3 kW
- Hoist control board
- Big bags griping cross-beam
- Set of hardware for assembly
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Corrosion protection is made of two-component priming enamel based polyurethane-acrylic resin production Lankwitzer (Germany) in the spray-drying chamber ATIS
- Machinery certificate
1 839 BYN
- Aeration nozzle IF-001-12 18 pcs
- Assembly kit (fittings, tees, polyurethane tube, bracket, nipple, gasket, plug)
- CAMOZZI filter regulator 1pc
- Ball valve G1 / 4 1 pc
- Axial pressure gauge, 0-12 bar 1pc
- 3/2 distributor CAMOZZI, G1 / 4, one-way. 1 PC
- Solenoid CAMOZZI A7E (220V-AC) 1pc
- A70 and G70 solenoid connector 122-800 1 pc
- Набор сменных картриджей для фильтра цемента "MAXAIR-24" - 4 штуки
297 BYN
- safety valve
- Adjusting ring
- Material - Carbon Steel
- Compound - a collar
- Passport to Safety Valve
8 735 BYN
- Фильтр цемента MAXAIR-24
- overpressure relief valve VDS273
- Cement level sensor RLB110 - 2 pcs.
- The shutter disk VFA300-LT
- OLI MVE 300/3 Vibrator
1 679 BYN
- Aeration nozzle IF-001-12 16 pcs
- Assembly kit (fittings, tees, polyurethane tube, bracket, nipple, gasket, plug)
- CAMOZZI filter regulator 1 pc
- Ball valve G1 / 4 1 pc
- Axial pressure gauge, 0-12 bar 1pc
- 3/2 distributor CAMOZZI, G1 / 4, one-way. 1 PC
- Solenoid CAMOZZI A7E (220V-AC) 1pc
- A70 and G70 solenoid connector 122-800 1 pc
7 350 BYN
- DCH-90 Dry chemical additives dispenser assembly
- Machinery certificate
CBP operation mode - fully automatic on the principle of "single button".
BP-2G-2250 Twin-shaft concrete mixer is installed on the elevated structure with the discharge height - 4 m. Concrete mixing plant is equipped with a chevron belt conveyor for lifting and loading of the aggregates into the mixer.
For storage and precise batching of the inert materials metering complex DCM-60. Возможна поставка бункеров увеличенного объема (до 72 куб. метров). Инертные загружаются и хранятся в бункерах, количество бункеров 3 по 20 куб. метра, общий объем бункеров 60 куб. метров. Под бункерами установлен ленточный конвейер-дозатор, на котором происходит точное дозирование компонентов, компоненты подаются из бункеров посредством открытия шиберных заслонок, заслонки управляются пневмосистемой “Camozzi” (Италия).
Upon achievement of the required batch of the inert materials, the conveyor is turned on and they are discharged into the belt conveyor's receiving hopper and after that into the mixer.
The cement is stored in a special warehouse - cement silo (not included in the basic package). Silos for cement must be selected the rate of two daily stock performance. For feeding cement from a cement silo dispenser must acquire the correct length screw.
Силосы цемента, обвязка для силоса и шнеки всегда в наличии на складе в Златоусте! Производитель “SCUTTI” (Италия)
С помощью шнека цемента подается в блок дозаторов БД-90, который состоит из дозатора цемента на 900 кг, воды на 450 литров и дозатора химической добавки на 60 литров. Каждый дозатор расположен на трех высокоточных тензодатчиках “CAS” и жесткой раме, что повышает точность дозирования. Дозатор цемента снабжен вибратором “OLI” для побуждения схода цемента при его залипании.
Batched aggregates are fed into the mixer where they are being mixed. Upon achievement of the required homogeneity of the mixture, Camozzi pneumatically operated gate is opened, and the mixture is discharged into a concrete mixer lorry or a receiving hopper.
Then the cycle is repeated.
One cycle lasts for about 50 seconds during which 0.8 cu m of ready-to-use concrete is produced. Plant's capacity is 80-106 cu m per hour of operation.
Возможна поставка бетонного завода в защитном покрытии цинк. Покрытие наносится методом холодного цинкования.
- Capacity: 106 cu m per hour
- Twin-shaft concrete mixer with belt conveyor
- Automatic control, "single button" principle
- Transportation in 2 euro trucks
- 2 year full warranty
Technical Features
- Capacity, cu m per hour 80...106
- Automatic operating mode
- BP-2G-2250 Concrete mixer
- Hoppers (number of x capacity, cu m) 3 x 18
- Silo capacity (optional), tons 160...315
- Pneumatic equipment (Italy) CAMOZZI
- ABAC Pole Position L20P Compressor (Italy) ABAC
- Design summer
- Load of inert materials into the concrete mixer belt conveyor
- Total power, kW 82
- Sector gate, pneumatic control
- Weight, kg 20,000
- Height, mm 9,600
- Width, mm 3700
- Length, mm 29,800

Quality
certificates

Products
in stock

Individual configuration
with prices for each item

Mobile
commissioning team
available

Worldwide
delivery
in trucks or containers
Geography of deliveries 2011-2018
Own production, in-stock products and
professional team allow us guarantee
most competitive prices, shortest
possible delivery time and high-quality goods
Call the hotline in Belarus
Our managers will answer all your questions from Monday till Friday:
from 06:00 a.m. to 05:00 p.m. (GMT+3, Moscow time)
Address: The Republic of Belarus, 220037, Minsk, ul. Marevskaya, 7a, pom.1 room 9
e-mail: info@zzbo.ru

Valery Stefanovich Sivitsky
Head of sales department in Minsk
Phone: +375 (33) 395-90-16
e-mail: sivitski78@zzbo.ru

Denis Zhilyakov
Director of the branch in the Republic of Belarus
Phone: +7-351-900-90-16
e-mail: 9009016@zzbo.ru
Place your order
We will send you the price,
conditions and terms of delivery

Response within 1 hour

You will get the offer with
individual delivery and payment conditions