SKIP-60 Concrete Plant
252 459 BYN




Enquire conditions
and delivery time

We'll call you back within 15 minutes

Specify your requirements

Send prices and terms of delivery
132 366 BYN
- BP-2G-1500 Twin-shaft concrete mixer
- Frame for skip hoist installation
- Skip, volume 1.8 cu m
- Winch drive - 18.5 kW power
- Пневмозатвор "Camozzi" - двойной
- Connection set for pneumatic equipment
- Armor shift flake type. Material: cast iron wear 16 mm
- Спицы усиленные (стальное литье) крепление типа "кулак"
- Changeable blades. Material: ЧХ16Н2Т cast iron (chromic high alloy wear-resistant)
- Автоматическая централизованная система смазки "BEKA" (Германия)
- Electricity to connect the remote control
- Maintenance kit (three armor, blade, needle)
- Concrete mixer machinery certificate
17 762 BYN
- Overpass E 07 00.000. Design enhanced, adapted for the discharge of concrete on the height of 4000 mm
- mixer platform with supporting structures
- Ladders for equipment maintenance
- Fence along the perimeter
- Staircase with handrails
- Funnel for unloading concrete with rubber guide
- Skip ways - rails
- Fastening construction for pipes and electric cables
- Hardware for the assembly trestle
- Coating: shotblasting, double coloration with drying chamber
- Total weight - 2528 kg
50 766 BYN
- Bunker-inert BI-36 (2 x 18) - 4 sections. The total volume of 36 cc. m
- Preparation under registers installation for heating inert materials
- Секторные затворы, с управлением пневмоцилиндрами "Camozzi" (Италия) - 4 шт.
- Пневмооборудование "Camozzi" (Италия) - 4 электро пневмораспределителя, комплект фитингов и трубок, 4 клапана быстрого выхлопа, 1 пневморегулятор, фильтр с манометром
- Вибратор "OLI" MVE300\3 (Италия) - 4 шт.
- The support frame, installation without foundation
- Дозатор инертных ДИ-6 (конвейер) с футерованным приводным барабаном. Мощность привода 7,5 кВт
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 4 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
21 883 BYN
- Mounting frame (powder coating). Weight - 200 kg
- Cement dispenser, dosage - 600 kg (powder coating):
- Two inlet nozzles for screw conveyors (one is covered by a cap)
- Connecting outer sheath with collar clamps
- Overpressure system
- Разгрузочная дисковая пневмозаслонка "Camozzi" ∅200
- CAS BSA500 strain sensors - 3 pieces
- Signal amplifier - weight sensor
- Пневмораспределители "Camozzi" (Италия) - 3 штуки
- OLI MVE 21 vibrator - 1 piece
- Water dispenser, dosage - 300 liters (powder coating):
- CAS BSA500 strain sensors - 3 pieces
- Разгрузочная шаровая пневмозаслонка ∅50 "Camozzi"
- Calpeda NM 50-12 FВ Pump
- Water and chemical agents multipoint injection system
- Signal amplifier - weight sensor
- Chemical additives dispenser, dosage - 40 liters, made of stainless steel:
- CAS BСA100 strain sensor - 1 piece
- Разгрузочная шаровая пневмозаслонка ∅50 "Camozzi"
- Signal amplifier - weight sensor
4 972 BYN
- ABAC 6000-270 CT7,5 Compressor assembly
- Manufacturer - ABAC (Italy)
- Receiver - 270 liters
- Performance 827 l min
- Power - 5.5 kW
- Режим работы полностью автоматический "одна" кнопка
- Buffer for storing concrete recipes in memory - 200 pieces
- Software: accounting of material consumption and equipment operation
- Контроллер "Omron" (Япония) серии CP1L
- Сенсорная панель управления "Omron" (Япония) серии NB. Диагональ 10,1 дюйма, широкий угол обзора, TFT-экран, 65 000 цветов.
- The control system to achieve homogeneity of the mixture and its mobility
- Transcend Flash Drive 4Gb
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- The control, protection and switching equipment «Schneider Electric» (France)
- Manual control panel with ingress protection buttons on mimic panel
- Set of diagrams and instruction manual
- Hardware for assembly RBU: metering complex overpass screw silage
- Hardware, accessories
- Wire for screw fixing
- Kit for connecting the database (pnevmotruba, sleeves, bends, RVC 51-70 clamps, duct PVC-5-C-60)
- Limit switch for the database
- Kit vodopodvedeniya (pipe bends, sleeves, T-joints, anchor bolts, brackets)
- Kit RBU pneumatic (air tubing, pnevmotruba, fittings, hardware)
- Set of cables
- Couplings (5 titles)
- compactor
- Acid sealant TempPlus
- Power and control cables, protected by metal hose (in mobile plants they are laid in frame)
- Set of locking sensors and executing mechanisms position sensors (skip, mixer's gate, etc.)
- Planetary counter-current concrete mixer BPP-3V-1500
- Mixer drive planetary 37 kW
- Concrete unloading gate. Drive - pneumatic cylinder
- Connection set for pneumatic equipment
- Replaceable armor of scaly type. Material: wear resistant cast iron
- Mixer cover with viewing window
- Secure access system
- Spokes reinforced
- Changeable blades. Material: ЧХ16Н2Т cast iron (chromic high alloy wear-resistant)
- Electricity to connect the remote control
- Water treatment system with water spray nozzles
- Concrete mixer machinery certificate
66 024 BYN
- Bunker-inert BI-60 (3 x 20) - 3 sections. The total volume of 60 cc. meter
- Preparation under registers installation for heating inert materials
- Секторные затворы, с управлением пневмоцилиндрами "Camozzi" (Италия) - 6 шт.
- Пневмооборудование "Camozzi" (Италия) - 6 электропневмораспределителей, комплект фитингов и трубок, 6 клапанов быстрого выхлопа, 1 пневморегулятор, фильтр с манометром
- Вибратор "OLI" MVE300\3 (Италия) - 6 шт.
- The support frame, installation without foundation
- Dispenser inert CI-9 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 4 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
84 490 BYN
- Бункера-инертных БИ-80 (4 х 20) - 8 секций. Общий объем 80 куб. метра
- Preparation under registers installation for heating inert materials
- Секторные затворы, с управлением пневмоцилиндрами "Camozzi" (Италия) - 8 шт.
- Пневмооборудование "Camozzi" (Италия) - 8 электро пневмораспределителей, комплект фитингов и трубок, 8 клапанов быстрого выхлопа, 1 пневморегулятор, фильтр с манометром
- Вибратор "Oli" MVE300\3 (Италия) - 8 шт.
- The support frame, installation without foundation
- Dispenser inert CI-12 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 6 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
- Решетка на секцию бункера 70х70 для ДКМ-36 - ДКМ-36.10.000
4 272 BYN
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Slinging loops
- Weight - 180 kg
44 034 BYN
- Burner diesel Baltur TBL 85 P (Italy)
- Heat generator TGV-600 basic version
- Fan assembly with a VR type motor 6-20 №8, 37 kW, 3000 r / min, lion. 270. 380 / 660V
- The automation system (control cabinet)
- chimney section
- Fuel tank with visual level control. Volume 600 l
- Schild in the control cabinet
- Passport and Manual
- Burner diesel Baltur Spark 35 DSGW (Italy)
- Heat generator TGV-250 basic version
- Fan assembly with a fan motor type BP isp.1 6-13M-8, 22 kW, 3000 r / min, lion. 270. 380/660
- The automation system (control cabinet)
- chimney section
- Fuel tank with visual level control. Volume 600 l
- Schild in the control cabinet
- Passport and Manual
- Burner diesel Baltur TBL 85 P (Italy)
- Heat generator TGV-600 basic version
- Fan assembly with a VR type motor 6-20 №8, 37 kW, 3000 r / min, lion. 270. 380 / 660V
- Warmed block boxing
- PVC window
- Door
- Lighting box unit
- The automation system (control cabinet)
- chimney section
- Fuel tank with visual level control. Volume 600 l
- Schild in the control cabinet
- Passport and Manual
9 523 BYN
- Фильтр цемента MAXAIR-24
- overpressure relief valve VDS273
- Cement level sensor RLB110 - 2 pcs.
- The shutter disk VFA300-LT
- OLI MVE 300/3 Vibrator
355 BYN
- Vibrator assembly, packed
- Disturbing force - 321 kg
- Machinery certificate
12 886 BYN
- Шнек "SCUTTI" (Италия) в сборе
- Pipe Diameter 219 mm Pipe Length 11 to 500 mm (sectional consists of four parts 3, 2.2, 3.7 and 2.98 meter connects flange)
- Привод: мотор-редуктор "SIEMENS" (Германия). Мощность 15 кВт, 300 об\мин
- The balanced shaft with spiral tselnovitoy
- Inlet connection - Adjustable Balloon
- Inspection window for cleaning and maintenance
- Shot peening, epoxy primer, acrylic-polyurethane enamel. Thickness: 100 microns
- Operational documentation
21 597 BYN
- Silo tank (V = 28 m3)
- Mounting frame
- Stairs
- Cover protection enclosure
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Corrosion protection is made of two-component priming enamel based polyurethane-acrylic resin production Lankwitzer (Germany) in the spray-drying chamber ATIS
- Machinery certificate
33 993 BYN
- Silo Tank (V = 50 m3): cover - 4 sectors, cylindrical section - 12 sectors, large cone - 4 sectors, small cone
- Mounting frame
- Stairs
- Cover protection enclosure - 11 sectors
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Corrosion protection is made of two-component priming enamel based polyurethane-acrylic resin production Lankwitzer (Germany) in the spray-drying chamber ATIS
- Frame for transportation
- Hardware for the assembly of a silo
- Polyurethane sealant Soudaflex FC 40 gray 600ml - 9 tubes
- Machinery certificate
- Режим работы полностью автоматический "одна" кнопка
- Buffer for storing concrete recipes in memory - 200 pieces
- SCADA software: accounting of the consumption of materials and volumes of manufactured products, dispatching of orders (invoices), recipe management, remote access to management and control over the plant operation (Target OS: Windows)
- Monoblock Windows 10
- Kyocera printer (analog)
- Flash Drive Transcend 4Gb (analogue)
- Контроллер "Omron" (Япония) серии CP1L
- Сенсорная панель управления "Omron" (Япония) серии NB. Диагональ 10,1 дюйма, широкий угол обзора, TFT-экран, 65 000 цветов.
- The control system to achieve homogeneity of the mixture and its mobility
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- The control, protection and switching equipment «Schneider Electric» (France)
- Manual control panel with ingress protection buttons on mimic panel
- Set of diagrams and instruction manual
752 BYN
- CALPEDA MXH 202E Pump assembly (Italy) for chemical agents supply
- Capacity - 80 liters/min
- Power - 0.33 kW
- Weight - 6.9 kg with packaging
- Machinery certificate
9 155 BYN
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Air conditioning
- Operator table
- Operator's chair
- Heater 2kW
- Slinging loops
- Weight 280 kg
714 BYN
- Valve VDS273 overpressure relief assembly
- Adjusting ring
- Operational documentation
- The shutter disk VFA300-LT
- Handle for gate control
- Operational documentation
917 BYN
- RLB cement level indicator assembly
- Adjusting ring
- Operational documentation
359 BYN
- safety valve
- Adjusting ring
- Material - Carbon Steel
- Compound - a collar
- Passport to Safety Valve
5 914 BYN
- Фильтр цемента "MAXAIR-24" в сборе (Италия)
- Cartridges pneumatic cleaning system
- Operational documentation
8 541 BYN
- DCH-90 Dry chemical additives dispenser assembly
- Machinery certificate
1 036 BYN
- Aeration nozzle IF-001-12 8pcs
- Assembly kit (fittings, tees, polyurethane tube, bracket, nipple, gasket, plug)
- CAMOZZI filter regulator 1 pc
- Ball valve G1 / 4 1 pc
- Axial pressure gauge, 0-12 bar 1pc
- 3/2 distributor CAMOZZI, G1 / 4, one-way. 1 PC
- Solenoid CAMOZZI A7E (220V-AC) 1pc
- A70 and G70 solenoid connector 122-800 1 pc
- Набор сменных картриджей для фильтра цемента "MAXAIR-24" - 4 штуки
15 669 BYN
- Lower frame
- Upper frame
- Upper structure for enlarging of loading height
- Sealing protective membrane
- Cutting system made of instrument steel
- Inspection window
- Support screw
- Protective grid
- Vibration mounts – 4 pieces
- Вибратор "OLI" MVE-300\3 - 1 штука
- E. hoist - lifting capacity of 2 tons, 3 kW
- Hoist control board
- Big bags griping cross-beam
- Set of hardware for assembly
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Corrosion protection is made of two-component priming enamel based polyurethane-acrylic resin production Lankwitzer (Germany) in the spray-drying chamber ATIS
- Machinery certificate
CBP operation mode - fully automatic on the principle of "single button".
BP-2G-1500s Twin-shaft concrete mixer is installed on the elevated structure with the discharge height - 4 m. Concrete mixing plant is equipped with a skip (bucket) for lifting and loading of the aggregates into the mixer. The mixer is equipped with imported LIKEDRIVE reduction gears and SIEMENS electricvigatel.
Skip mixer has a bottom gate to reduce dust and increase discharge rate.
For storage and precise batching of the inert materials metering complex DCM-36. Возможна поставка бункеров увеличенного объема (до 80 куб. метров). Инертные загружаются и хранятся в бункерах, количество бункеров 2 по 18 куб. метра, общий объем бункеров 36 куб. метров. Под бункерами установлен ленточный конвейер-дозатор, на котором происходит точное дозирование компонентов, компоненты подаются из бункеров посредством открытия шиберных заслонок, заслонки управляются пневмосистемой “Camozzi”(Италия).
Upon achievement of the required batch of the inert materials, the conveyor is turned on and they are discharged into mixer's skip. The skip lifts up and the inert materials are discharged into the concrete mixer.
The cement is stored in a special warehouse - cement silo (not included in the basic package). Silos for cement must be selected the rate of two daily stock performance. For feeding cement from a cement silo dispenser must acquire the correct length screw.
Силосы цемента, обвязка для силоса и шнеки всегда в наличии на складе в Златоусте! Производитель “SCUTTI” (Италия)
DB-dispenser assembly 60 which includes the dispenser 600 kg of cement, 300 liters of water and a chemical additive dispenser 40 liters.
Each dispenser is located on three high-precision strain gauges "CAS" and a rigid frame, which improves metering accuracy. The cement batcher is equipped with a vibrator "OLI" to induce the descent of cement when it sticks.
Batched aggregates are fed into the mixer where they are being mixed. Upon achievement of the required homogeneity of the mixture, Camozzi pneumatically operated gate is opened, and the mixture is discharged into a concrete mixer lorry or a receiving hopper. Then the cycle is repeated.
One cycle lasts for 60 seconds maximum during which 1 cu m of ready-to-use concrete is produced. Plant's capacity is 50-60 cu m per hour of operation.
Возможна поставка бетонного завода в защитном покрытии цинк. Покрытие наносится методом холодного цинкования
- Capacity: up to 60 cu m per hour
- Automatic control, "single button" principle
- Transportation in 2 euro trucks
- Reliable imported components
- 2 year full warranty
Technical Features
- Capacity, cu m per hour 45...60
- Automatic operating mode
- BP-2G-1500s Concrete mixer
- Hoppers (number of x capacity, cu m) 2 x 18
- Cement silo, t (optional) 22...315
- Pneumatic equipment (Italy) CAMOZZI
- ABAC Pole Position L20P Compressor (Italy) ABAC
- Design summer
- Load of inert materials into the concrete mixer skip
- Total power, kW 84.9
- Sector gate, pneumatic control
- Weight, kg 18,050
- Height, mm 9,340
- Width, mm 3700
- Length, mm 22,100

Quality
certificates

Products
in stock

Individual configuration
with prices for each item

Mobile
commissioning team
available

Worldwide
delivery
in trucks or containers
География поставок 2011-2018 гг.
Own production, in-stock products and
professional team allow us guarantee
most competitive prices, shortest
possible delivery time and high-quality goods
Звоните, горячая линия в Белоруссии
Our managers will answer all your questions from Monday till Friday:
from 06:00 a.m. to 05:00 p.m. (GMT+3, Moscow time)
Address: The Republic of Belarus, 220037, Minsk, ul. Marevskaya, 7a, pom.1 room 9
e-mail: info@zzbo.ru

Валерий Стефанович Сивицкий
Начальник отдела продаж в г. Минск
Phone: +375 (33) 395-90-16
e-mail: sivitski78@zzbo.ru

Denis Zhilyakov
Директор филиала в республике Беларусь
Phone: +7-351-900-90-16
e-mail: 9009016@zzbo.ru
Place your order
We will send you the price,
conditions and terms of delivery

Response within 1 hour

You will get the offer with
individual delivery and payment conditions