LENTA-36 Concrete Plant
139 710 BYN




Enquire conditions
and delivery time

We'll call you back within 15 minutes

Specify your requirements

Send prices and terms of delivery
28 457 BYN
- BP-2G-750 Twin-shaft concrete mixer
- Затвор двухсторонний"Camozzi" (Италия)
- Connection set for pneumatic equipment
- Armor shift flake type. Material: cast iron wear 15 mm
- Спицы усиленные (стальное литье) крепление типа "кулак"
- Changeable blades. Material: ЧХ16Н2Т cast iron (chromic high alloy wear-resistant)
- Устройство равномерного распределения воды с присоединительным диаметром 2"
- Electricity to connect the remote control
- Maintenance kit (three armor, blade, needle)
- Purchased parts machinery certificates
- Concrete mixer machinery certificate
25 333 BYN
- Belt conveyor assembly: 16 m long, 600 mm wide
- Drive: 7,5 kW gear motor
- Receiving hopper
- Mounting frame. 25 degrees inclination
- Lined lead drum. Diameter - 390 mm, width - 640 mm
- Driven drum. Diameter - 377 mm, width - 640 mm
- Chevron belt, thickness - 6 mm
- Замок стыковочный "Alligator" (США)
- Grooved roller carriage (zinc-plated rollers). Diameter - 57 mm, 46 pieces
- Support rollers (zinc-plated). Diameter - 57 mm, 7 pieces
- Directing rollers (zinc-plated). Diameter - 57 mm, 14 pieces
- Machinery certificate
13 650 BYN
- Overpass E 08.00.000. Design enhanced, adapted for the discharge of concrete on the height of 4000 mm
- mixer platform with supporting structures
- Ladders for equipment maintenance
- Fence along the perimeter
- Staircase with handrails
- Funnel for unloading concrete with rubber guide
- Fastening construction for pipes and electric cables
- Hardware for the assembly trestle
- Coating: shotblasting, double coloration with drying chamber
- Total weight - 1902 kg
32 830 BYN
- Бункера-инертных БИ-16 (2 х 8) - 2 секции. Общий объем 16 куб. метров
- Preparation under registers installation for heating inert materials
- Секторные затворы, с управлением пневмоцилиндрами "Camozzi" (Италия) - 2 шт.
- Пневмооборудование "Camozzi" (Италия) - 2 электро пневмораспределителя, комплект фитингов и трубок, 2 клапана быстрого выхлопа, 1 пневморегулятор, фильтр с манометром
- Вибратор "OLI" MVE300\3 (Италия) - 2 шт.
- The support frame, installation without foundation
- Дозатор инертных ДИ-6 (конвейер) с футерованным приводным барабаном. Мощность привода 5,5 кВт
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 4 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
14 457 BYN
- Mounting frame (powder coating). Weight - 150 kg
- Cement dispenser, a dosage - 300 kg (powder coating):
- Two inlet nozzles for screw conveyors (one is covered by a cap)
- Connecting outer sheath with collar clamps
- Overpressure system
- Разгрузочная дисковая пневмозаслонка "Camozzi" ∅200
- CAS BSA500 strain sensors - 3 pieces
- Signal amplifier - weight sensor
- Пневмораспределители "Camozzi" (Италия) - 3 штуки
- OLI MVE 21 vibrator - 1 piece
- Water dispenser for 150 liters (powder coating):
- CAS BSA500 strain sensors - 3 pieces
- Calpeda NM 40-12 FA Pump
- Water and chemical agents multipoint injection system
- Signal amplifier - weight sensor
- Сhemical additives dispenser, dosage - 20 liters, made of stainless steel:
- CAS BСA100 strain sensor - 1 piece
- Разгрузочная шаровая пневмозаслонка ∅50 "Camozzi"
- Signal amplifier - weight sensor
3 983 BYN
- ABAC 5900B-200ST 5,5 compressor assembly
- Manufacturer - ABAC (Italy)
- Receiver - 200 liters
- Performance 653 l min
- Power - 4 kW
- Режим работы полностью автоматический "одна" кнопка
- Buffer for storing concrete recipes in memory - 200 pieces
- Software: accounting of material consumption and equipment operation
- Контроллер "Omron" (Япония) серии CP1L
- Сенсорная панель управления "Omron" (Япония) серии NB. Диагональ 10,1 дюйма, широкий угол обзора, TFT-экран, 65 000 цветов.
- The control system to achieve homogeneity of the mixture and its mobility
- Transcend Flash Drive 4Gb
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- The control, protection and switching equipment «Schneider Electric» (France)
- Manual control panel with ingress protection buttons on mimic panel
- Set of diagrams and instruction manual
- Hardware for assembly RBU: metering complex overpass screw silage
- Hardware, accessories
- Wire for screw fixing
- Kit for connecting the database (pnevmotruba, sleeves, bends, RVC 51-70 clamps, duct PVC-5-C-60)
- Limit switch for the database
- Kit vodopodvedeniya (pipe bends, sleeves, T-joints, anchor bolts, brackets)
- Kit RBU pneumatic (air tubing, pnevmotruba, fittings, hardware)
- Set of cables
- Couplings (5 titles)
- compactor
- Acid sealant TempPlus
- Power and control cables, protected by metal hose (in mobile plants they are laid in frame)
- Set of locking sensors and executing mechanisms position sensors (skip, mixer's gate, etc.)
- Planetary counter-current concrete mixer BPP-3V-750
- Mixer drive planetary 18.5 kW
- Concrete unloading gate. Drive - pneumatic cylinder
- Connection set for pneumatic equipment
- Replaceable armor of scaly type. Material: wear resistant cast iron
- Mixer cover with viewing window
- Secure access system
- Spokes reinforced
- Changeable blades. Material: ЧХ16Н2Т cast iron (chromic high alloy wear-resistant)
- Electricity to connect the remote control
- Water treatment system with water spray nozzles
- Concrete mixer machinery certificate
41 547 BYN
- Bunker-inert BI-24 (3 x 8) - 3 sections. The total volume of 24 cc. meter
- Preparation under registers installation for heating inert materials
- Секторные затворы, с управлением пневмоцилиндрами "Camozzi" (Италия) - 3 шт.
- Пневмооборудование "Camozzi" (Италия) - 3 электро пневмораспределителя, комплект фитингов и трубок, 3 клапана быстрого выхлопа, 1 пневморегулятор, фильтр с манометром
- Вибратор "OLI" MVE300\3 (Италия) - 3 шт.
- The support frame, installation without foundation
- Dispenser inert CI-9 (conveyor) with the lined drive drum. Drive power 7.5 kW
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 4 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
43 680 BYN
- Bunker-inert BI-36 (2 x 18) - 4 sections. The total volume of 36 cc. m
- Preparation under registers installation for heating inert materials
- Секторные затворы, с управлением пневмоцилиндрами "Camozzi" (Италия) - 4 шт.
- Пневмооборудование "Camozzi" (Италия) - 4 электро пневмораспределителя, комплект фитингов и трубок, 4 клапана быстрого выхлопа, 1 пневморегулятор, фильтр с манометром
- Вибратор "OLI" MVE300\3 (Италия) - 4 шт.
- The support frame, installation without foundation
- Дозатор инертных ДИ-6 (конвейер) с футерованным приводным барабаном. Мощность привода 7,5 кВт
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 4 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
56 807 BYN
- Bunker-inert BI-60 (3 x 20) - 3 sections. The total volume of 60 cc. meter
- Preparation under registers installation for heating inert materials
- Секторные затворы, с управлением пневмоцилиндрами "Camozzi" (Италия) - 6 шт.
- Пневмооборудование "Camozzi" (Италия) - 6 электропневмораспределителей, комплект фитингов и трубок, 6 клапанов быстрого выхлопа, 1 пневморегулятор, фильтр с манометром
- Вибратор "OLI" MVE300\3 (Италия) - 6 шт.
- The support frame, installation without foundation
- Dispenser inert CI-9 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 4 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
72 697 BYN
- Бункера-инертных БИ-80 (4 х 20) - 8 секций. Общий объем 80 куб. метра
- Preparation under registers installation for heating inert materials
- Секторные затворы, с управлением пневмоцилиндрами "Camozzi" (Италия) - 8 шт.
- Пневмооборудование "Camozzi" (Италия) - 8 электро пневмораспределителей, комплект фитингов и трубок, 8 клапанов быстрого выхлопа, 1 пневморегулятор, фильтр с манометром
- Вибратор "Oli" MVE300\3 (Италия) - 8 шт.
- The support frame, installation without foundation
- Dispenser inert CI-12 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 6 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
3 327 BYN
- Lattice with section 100x100 (70x70). Cell height 70 mm. Weight 575 kg
3 677 BYN
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Slinging loops
- Weight - 180 kg
19 333 BYN
- Gas burners Baltur TBG 35P ramp MM.407
- Manometer electrocontact DM2010Sg, 0-0,6MPa range
- Manometer showing the TM-510R.00, 0-0,6MPa range
- Safety valve 17s28nzh DN50 / 80, pH = 0.5 MPa
- Temperature sensor type Pt100 RTD
- Crane grooved ball DN15
- Crane grooved ball DN25
- Ruff for cleaning fire tubes
- chimney section (complete with 1 im with spark arrester and set of fasteners and gaskets)
- boiler control cabinet
- Passport and operating instructions on the boiler
17 000 BYN
- Burner diesel Baltur Spark 35 DSG W
- Manometer electrocontact DM2010Sg, 0-0,6MPa range
- Manometer showing the TM-510R.00, 0-0,6MPa range
- Safety valve 17s28nzh DN50 / 80, pH = 0.5 MPa
- Temperature sensor type Pt100 RTD
- Crane grooved ball DN15
- Crane grooved ball DN25
- Ruff for cleaning fire tubes
- chimney section (complete with 1 im with spark arrester and set of fasteners and gaskets)
- 600l volume of the fuel tank
- boiler control cabinet
- Passport and operating instructions on the boiler
42 667 BYN
- Burner diesel Baltur TBL 85 P (Italy)
- Heat generator TGV-600 basic version
- Fan assembly with a VR type motor 6-20 №8, 37 kW, 3000 r / min, lion. 270. 380 / 660V
- The automation system (control cabinet)
- chimney section
- Fuel tank with visual level control. Volume 600 l
- Schild in the control cabinet
- Passport and Manual
- Burner diesel Baltur Spark 35 DSGW (Italy)
- Heat generator TGV-250 basic version
- Fan assembly with a fan motor type BP isp.1 6-13M-8, 22 kW, 3000 r / min, lion. 270. 380/660
- The automation system (control cabinet)
- chimney section
- Fuel tank with visual level control. Volume 600 l
- Schild in the control cabinet
- Passport and Manual
973 BYN
- Aeration nozzle IF-001-12 8pcs
- Assembly kit (fittings, tees, polyurethane tube, bracket, nipple, gasket, plug)
- CAMOZZI filter regulator 1 pc
- Ball valve G1 / 4 1 pc
- Axial pressure gauge, 0-12 bar 1pc
- 3/2 distributor CAMOZZI, G1 / 4, one-way. 1 PC
- Solenoid CAMOZZI A7E (220V-AC) 1pc
- A70 and G70 solenoid connector 122-800 1 pc
- Режим работы полностью автоматический "одна" кнопка
- Buffer for storing concrete recipes in memory - 200 pieces
- SCADA software: accounting of the consumption of materials and volumes of manufactured products, dispatching of orders (invoices), recipe management, remote access to management and control over the plant operation (Target OS: Windows)
- Monoblock Windows 10
- Kyocera printer (analog)
- Flash Drive Transcend 4Gb (analogue)
- Контроллер "Omron" (Япония) серии CP1L
- Сенсорная панель управления "Omron" (Япония) серии NB. Диагональ 10,1 дюйма, широкий угол обзора, TFT-экран, 65 000 цветов.
- The control system to achieve homogeneity of the mixture and its mobility
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- The control, protection and switching equipment «Schneider Electric» (France)
- Manual control panel with ingress protection buttons on mimic panel
- Set of diagrams and instruction manual
727 BYN
- CALPEDA MXH 202E Pump assembly (Italy) for chemical agents supply
- Capacity - 80 liters/min
- Power - 0.33 kW
- Weight - 6.9 kg with packaging
- Machinery certificate
1 417 BYN
- CALPEDA NM 40-12 F/A Pump assembly (Italy) for water supply
- Capacity - 550 liters/min
- 1.1 kW power
- Weight - 27 kg with packaging
- Machinery certificate
14 297 BYN
- Silo tank (V = 28 m3)
- Mounting frame
- Stairs
- Cover protection enclosure
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Corrosion protection is made of two-component priming enamel based polyurethane-acrylic resin production Lankwitzer (Germany) in the spray-drying chamber ATIS
- Machinery certificate
22 367 BYN
- Silo Tank (V = 50 m3): cover - 4 sectors, cylindrical section - 12 sectors, large cone - 4 sectors, small cone
- Mounting frame
- Stairs
- Cover protection enclosure - 11 sectors
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Corrosion protection is made of two-component priming enamel based polyurethane-acrylic resin production Lankwitzer (Germany) in the spray-drying chamber ATIS
- Frame for transportation
- Hardware for the assembly of a silo
- Polyurethane sealant Soudaflex FC 40 gray 600ml - 9 tubes
- Machinery certificate
300 BYN
- Vibrator assembly, packed
- Disturbing force - 321 kg
- Machinery certificate
10 407 BYN
- Шнек "SCUTTI" (Италия) в сборе
- Pipe Diameter 219 mm, length of the pipe 10 000 mm (sectional consists of four parts (3, 2.2, 2.2 and 2.98 meter connects flange)
- Привод: мотор-редуктор "SIEMENS" (Германия). Мощность 11 кВт, 300 об\мин
- The balanced shaft with spiral tselnovitoy
- Inlet connection - Adjustable Balloon
- Inspection window for cleaning and maintenance
- Shot peening, epoxy primer, acrylic-polyurethane enamel. Thickness: 100 microns
- Operational documentation
7 500 BYN
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Air conditioning
- Operator table
- Operator's chair
- Heater 2kW
- Slinging loops
- Weight 280 kg
5 443 BYN
- Фильтр цемента "MAXAIR-24" в сборе (Италия)
- Cartridges pneumatic cleaning system
- Operational documentation
- The shutter disk VFA300-LT
- Handle for gate control
- Operational documentation
843 BYN
- RLB cement level indicator assembly
- Adjusting ring
- Operational documentation
657 BYN
- Valve VDS273 overpressure relief assembly
- Adjusting ring
- Operational documentation
2 177 BYN
- RMK-2M washer
- Mounting frame
- Service ladder
- Protective cover of precipitation
- Dispenser capacity 2.35 tons of cement
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Corrosion protection is made of two-component priming enamel based polyurethane-acrylic resin production Lankwitzer (Germany) in the spray-drying chamber ATIS
- Knife material: high quality tool steel
- Machinery certificate
2 243 BYN
- RMK-2M washer
- Mounting frame
- Service ladder
- Protective cover of precipitation
- Dispenser capacity 2.35 tons of cement
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Corrosion protection is made of two-component priming enamel based polyurethane-acrylic resin production Lankwitzer (Germany) in the spray-drying chamber ATIS
- Knife material: high quality tool steel
- Machinery certificate
7 350 BYN
- DCH-90 Dry chemical additives dispenser assembly
- Machinery certificate
- Набор сменных картриджей для фильтра цемента "MAXAIR-24" - 4 штуки
297 BYN
- safety valve
- Adjusting ring
- Material - Carbon Steel
- Compound - a collar
- Passport to Safety Valve
8 735 BYN
- Фильтр цемента MAXAIR-24
- overpressure relief valve VDS273
- Cement level sensor RLB110 - 2 pcs.
- The shutter disk VFA300-LT
- OLI MVE 300/3 Vibrator
12 713 BYN
- Lower frame
- Upper frame
- Upper structure for enlarging of loading height
- Sealing protective membrane
- Cutting system made of instrument steel
- Inspection window
- Support screw
- Protective grid
- Vibration mounts – 4 pieces
- Вибратор "OLI" MVE-300\3 - 1 штука
- E. hoist - lifting capacity of 2 tons, 3 kW
- Hoist control board
- Big bags griping cross-beam
- Set of hardware for assembly
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Corrosion protection is made of two-component priming enamel based polyurethane-acrylic resin production Lankwitzer (Germany) in the spray-drying chamber ATIS
- Machinery certificate
CBP operation mode - fully automatic, according to "single button" principle.
BP-2G-750 Twin-shaft concrete mixer is installed on the elevated structure with the discharge height - 4 m. LENTA-36 concrete mixing plant is equipped with a chevroned belt conveyor for lifting and loading of the aggregates into the mixer.
For storage and precise batching of the inert materials metering complex DKS-16. Возможна поставка бункеров увеличенного объема (до 72 куб. метров). Инертные загружаются и хранятся в бункерах, количество бункеров 2 по 8 куб. метров, общий объем бункеров 16 куб. метров. Под бункерами установлен ленточный конвейер-дозатор, на котором происходит точное дозирование компонентов, компоненты подаются из бункеров посредством открытия шиберных заслонок, заслонки управляются пневмосистемой “Camozzi”(Италия).
Upon achievement of the required batch of the inert materials, the conveyor is turned on and they are discharged into the belt conveyor's receiving hopper and after that into the mixer.
The cement is stored in a special warehouse - cement silo (not included in the basic package). Silos for cement must be selected the rate of two daily stock performance. For feeding cement from a cement silo dispenser must acquire the correct length screw.
Силосы цемента, обвязка для силоса и шнеки всегда в наличии на складе в Златоусте! Производитель “SCUTTI” (Италия)
Using cement is fed into the screw BD-30 block of dispensers.BD-30 consists of 300 kg cement dispenser, 150 l water dispenser and 20 l chemical additives dispenser.
Each dispenser is mounted on three high-precision CAS strain sensors and a mounted frame which guarantees high accuracy of the batching. Cement dispenser is supplied with OLI vibrator for cement free falling in case it's sticked.
Batched aggregates are fed into the mixer where they are being mixed. Upon achievement of the required homogeneity of the mixture, Camozzi pneumatically operated gate is opened, and the mixture is discharged into a concrete mixer lorry or a receiving hopper. Then the cycle is repeated.
One cycle lasts for 50 seconds maximum during which 0.5-0.6 cu m of ready-to-use concrete is produced. LENTA-36 capacity is 25-36 cu m per hour of operation.
Возможна поставка бетонного завода в защитном покрытии цинк. Покрытие наносится методом холодного цинкования.
- Capacity: 36 cu m per hour
- Twin-shaft mixer, belt conveyor for inert materials feeding
- Automatic control, "single button" principle
- Transportation in two 2 euro trucks
- 2 year full warranty
Technical Features
- Capacity, cu m per hour 24...36
- Automatic operating mode
- BP-2G-750 Concrete mixer
- Hoppers (number of x capacity, cu m) 2 x 8
- Silo capacity (optional), tons 22...315
- Pneumatic equipment (Italy) CAMOZZI
- ABAC Pole Position L20P Compressor (Italy) ABAC
- Design summer
- Load of inert materials into the concrete mixer belt conveyor
- Total power, kW 51
- Sector gate, pneumatic control
- Weight, kg 10,000
- Height, mm 8,000
- Width, mm 3,600
- Length, mm 22,350

Quality
certificates

Products
in stock

Individual configuration
with prices for each item

Mobile
commissioning team
available

Worldwide
delivery
in trucks or containers
Geography of deliveries 2011-2018
Own production, in-stock products and
professional team allow us guarantee
most competitive prices, shortest
possible delivery time and high-quality goods
Call the hotline in Belarus
Our managers will answer all your questions from Monday till Friday:
from 06:00 a.m. to 05:00 p.m. (GMT+3, Moscow time)
Address: The Republic of Belarus, 220037, Minsk, ul. Marevskaya, 7a, pom.1 room 9
e-mail: info@zzbo.ru

Valery Stefanovich Sivitsky
Head of sales department in Minsk
Phone: +375 (33) 395-90-16
e-mail: sivitski78@zzbo.ru

Denis Zhilyakov
Director of the branch in the Republic of Belarus
Phone: +7-351-900-90-16
e-mail: 9009016@zzbo.ru
Place your order
We will send you the price,
conditions and terms of delivery

Response within 1 hour

You will get the offer with
individual delivery and payment conditions